SKU: 46149920358

Gonzalez Come and Take It Pigment-dyed Hoodie

Sale price$72.90 Regular price$81.00
Save 10%

Pay in installments of $20.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Gonzalez Come and Take It Pigment-dyed HoodieThese embroidered vintage looking Unisex pigment dyed hoodie have a washed out look thats been achieved by pigment dyeing the garment. The coloring process ensures a unique shade for the hoodie, making each item a one of a kind. Broken in like an old favorite the first day. The Gonzales "come and take it" cannon was a Spanish made, bronze artillery piece of six pound caliber. The gun was the object of contention in late September and early October

These embroidered vintage-looking Unisex pigment-dyed hoodie have a washed-out look that’s been achieved by pigment-dyeing the garment. The coloring process ensures a unique shade for the hoodie, making each item a one-of-a-kind. Broken in like an old favorite the first day. 

The Gonzales "come and take it" cannon was a Spanish-made, bronze artillery piece of six-pound caliber. The gun was the object of contention in late September and early October 1835 between a Mexican military detachment from Bexar and Anglo-Celtic colonists. The disagreement produced the battle of Gonzales, considered to be the first battle of the Texas Revolution. On January 1, 1831, Green DeWitt initiated the new year by writing Ramón Músquiz, the political chief of Bexar, asking him to make arrangements for a cannon to be furnished to the Gonzales colonists for protection against hostile Indians. On March 10, 1831, after some delay, James Tumlinson, Jr., a DeWitt colonist at Bexar, received one bronze cannon to be turned over to Green DeWitt at Gonzales. The fact that the gun was not carriage mounted until about September 28, 1835, suggests that in 1831 it was probably swivel mounted in one of the two blockhouses that had been constructed at Gonzales in 1827. Thus mounted it would have served as a visual deterrent to hostile Indians.

The cannon is lost to history until September 1835, when Col. Domingo de Ugartechea, the military commander at Bexar, sent Corporal Casimiro De León and five soldiers of the Second Flying Company of San Carlos de Parras to retrieve the cannon. The Gonzales colonists notified Ugartechea they were keeping the gun and took the soldiers prisoner. The cannon was then buried in George W. Davis's peach orchard and couriers sent to the Anglo-Celtic settlements on the Colorado River to obtain armed assistance. Ugartechea responded by sending 100 troops under Lt. Francisco de Castañeda to make a more serious request for the return of the gun. On September 29, Capt. Robert M. Coleman arrived at Gonzales with a militia company of thirty mounted Indian fighters. The gun was retrieved from its shallow grave, taken to John Sowell's blacksmith shop, and mounted on a pair of cart wheels. After the organization of the Texian "Army of the People" under Gen. Stephen F. Austin, the cannon was assigned to Capt. James C. Neill's artillery company and hauled to San Antonio. After the capture of Bexar in December 1835, the cannon remained at the Alamo, where it was one of twenty-one artillery pieces commandeered by the Mexican army upon the recapture of Bexar on March 6, 1836.

The name "Come and Take It" refers to the motto adopted by the Texian rebels. On the morning of October 2, 1835, Lieutenant Castañeda requested the cannon be returned to the Mexican military-a condition on which it had been loaned to DeWitt's Colony-but the Texians pointed to the gun which stood about 200 yards to their rear, and said, "there it is-come and take it." Soon after the conflict began, at the request of the Anglo-Celtic leaders, the ladies of the settlement hastily made a flag to fly over the cannon. The flag featured a white ground with a black cannon in the center, and the motto "Come and take it!" above and below. Much has been made of an account that appears in Noah Smithwick's The Evolution of a State or Recollections of Old Texas Days (1900), in which Smithwick identifies the cannon as an iron six-pounder. This is the only account, however, of events at Gonzales in October 1835 that identifies the Gonzales gun as being made of iron. Primary documents indicate that the gun probably was a cannon belonging to George Huff, a blacksmith, and gunsmith from San Felipe. Another discovery claim concerning the Gonzales cannon came into being after a major flood in July 1936, when a small iron salute cannon was discovered downstream from Hardy's Bluff on Sandies creek. Many individuals believe the small salute gun is the Gonzales cannon because it was found at a location that appears to match the information in the Smithwick book. The gun, however, matches none of the characteristics attributed to the Gonzales cannon by reliable primary sources. The Smithwick account incorrectly identifies the Gonzales cannon, but the Sandies salute gun does not even conform to Smithwick's description of the cannon he believed to be the Gonzales gun. Although what happened to the "Come and Take It" cannon is not known, still another, and probably more likely scenario, resulted from actions of the Mexican army after the fall of the Alamo, when Antonio López de Santa Anna's troops melted down an unknown number of bronze guns. The Gonzales cannon may have been one of these. 


• 100% cotton face
• 80% cotton, 20% polyester blend
• Yarn diameter: 30 singles
• Fabric weight: 9 oz./yd² (305.15 g/m²)
• Regular fit
• Split stitch double needle sewing on all seams
• Twill neck tape
• 1 x 1 rib at cuffs and waistband
• Jersey-lined hood with sewn eyelets
• Pouch pocket
• Matching drawstrings

 

Size guide

  LENGTH (inches) WIDTH (inches) SLEEVE LENGTH (inches)
S 28 20 34 ½
M 29 22 35 ½
L 30 24 36 ½
XL 31 26 37 ½
2XL 32 27 38 ½
3XL 22 28 39 ½
  LENGTH (cm) WIDTH (cm) SLEEVE LENGTH (cm)
S 71.1 50.8 87.6
M 73.7 55.9 90.2
L 76.2 61 92.7
XL 78.7 66 95.3
2XL 81.3 68.6 97.8
3XL 55.9 71.1 100.3
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 46149920358

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
AMAZON CUSTOMER
Fort Morgan, US
★★★★★ 5
plug and play ...fast ...hi performance... same as higher price
plug and play ...fast ...hi performance... same as higher price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2026
H
Verified Purchase
H. T.
Natrona Heights, US
★★★★★ 5
premium feel in the hand.
Can't really say whether it's that good or not elecronics wise since I didn't test it but it works like it's supposed to. Meanwhile, the housing oh man. It's premium. It feels like hard aluminum or something, very nice. Edges are rounded too with just the right sharpness like a macbook. Others would've been plastic. This is really nice for the price and if the specs really are 10Gbps, that's really good because most in this price range is 5Gbps.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
A
Verified Purchase
Amazon Customer
Massapequa, US
★★★★★ 1
Failed to support desktop PCs with USB 3.2 Gen 2 ports
Does not work with my HP mini PC with USB 3.2 gen 2 ports - when connecting USB portable SSDs to the hub. You won't believe it, but many USB 3.2 Gen 2 hubs only support laptops not desktop PCs (except hubs that have dedicated power supply for higher power USB devices e.g. SSD/HDDs) when connecting USB portable SSDs to the hub. We need a major fix from many of the USB hub vendors so these products can work with desktop PCs that have USB 3.2 Gen 2 ports. Workaround: Just directly connect the USB portable SSD to the PC instead. If you need more USB ports, pick up a good old USB 3.0 hub. They're working correctly with portable USB SSDs when working with desktop PCs. (You'd need a powered USB hub if you're connecting 2 or more portable SSDs - do your own calculation: 5V - 1A per SSD/HDD).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 2, 2025
M
Verified Purchase
Menace
Battle Creek, US
★★★★★ 5
Worked like a charm
Style: 5-in-1 USB-C Hub
This thing worked exactly as i needed it to. Was able to connect to a phone with a cooked screen, download all the content to another device, I'm a happy camper.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2026
A
Verified Purchase
American Wireman
Los Angeles, US
★★★★★ 5
Need more USB-C ports AND passthrough power?
Style: 4-in-1 USB-C Hub
This hub is very handy if you need to use multiple USB-C peripherals but still need passthrough power for your laptop, 65 watts in my case. I have not experienced any noticeable difference in transfer speeds or heat. Typical Belkin high quality, all the ports are tight and connections feel secure. I want to note that this unit will NOT allow HDMI functions via USB-C. I still need to plug my external display directly into the other USB-C port on my laptop. The only downside is that the surface of the hub is a high gloss black, which will scuff like crazy the first time you toss it into your backpack or set it on the table. Does not at all effect functionality but can be annoying for some. Otherwise, this is now one of my essential daily tech accessories.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2025

recommand products